Звук Skype в Linux Mint KDE 15

Камрады, доброго всем времени суток)
Поставил на лаптоп с предустановленной Windows 8 второй системой Linux Mint KDE 15.
Всем доволен, за исключением того, как работает Skype. Если не включать qmmp, то он жив; но после воспроизведения музыки в qmmp звук в Skype вырубается полностью; более того, в окошке этой умной и полезной программы появляется большая такая красивая надпись - "проблемы с воспроизведением звука".
Лечится ли это каким-либо способом? Google не помог совсем, а я после установки Linux на UEFI совсем никакой уже(
Спасибо!

1. версия скайпа, как и откуда ставил?
2. кто там в ваших полуубунтах-недодебианах звуком в кедах заведует? если родной phonon, то какие настройки и какие либки он пользует?
3. почему именно qmmp, а не, например, родной для кедов amarok или clementine?
4. консольно запускал скайп после отвала звука, есть какая-нибудь ругань в консоли?
5. с D-Bus ошибки не сыплются?
6. у минтоводов что говорят в коммунити по этому поводу?

ПС: а вообще, традиционно, УМВР

Код:

rpm -qa skype phonon kde-workspace && lsb_release -rcsi && uname -r

phonon-4.6.0-7.fc19.x86_64

kde-workspace-4.10.5-3.fc19.x86_64

skype-4.2.0.11-fc16.i586

Fedora 19 Schrödinger’sCat

3.10.10-200.fc19.x86_64

так что похоже на минтопроблемы, хотя и таки да, скайп под линуксом не торт.
ППС: и таки да, воспитанные человеки в таких случаях выхлоп dmesg прикладывают сразу после возникновения ошибки.

1) Skype версия 4.2.0.11, ставил через менеджер программ.
После установки сразу не заработал, помогла вот это процедура
http://ubuntunews.ru/articles/zastavlyaem-rabotat-skype-na-ubuntu-1304.html
2) Как это узнать?
3) qmmp нравится; вместе с amarok все хорошо работает
4, 5) нет, ошибок и ругани в консоли нет
6) в том-то и дело, что ничего

-------------

Гм... а сейчас (т.е. утром) проблема исчезла (?) Все работает... вроде бы.
Old_Punk, спасибо!

1.>ставил через менеджер программ.
понятно, тогда неплохо было бы увидеть какие репозитории подключены, в консоле, ну или что там в минтах терминалом работает, хотя консоле - штатный кедовый эмулятор терминала, сделать:

Код:

sudo cat /etc/apt/sources.list

выхлоп сюда, про тег code не забываем.
2. например вот так:
2.1.

2.2.

2.3.

2.4.

2.5.

3. ну нравится, так нравится, единственно, надо разобраться, в Вашем случае, с захватом аудиовыхода.

ну если работает, то и пусть работает, а, если не секрет, чем вызван выбор именно минта? та же кубунта пооточеннее будет, ну если что ещё, какие вопросы, обращайтесь.

Нет, снова не работает. Если запускать Amarok вместо qmmp, то звук не пропадает.

1) После пропажи звука запускаю skye из консоли, вижу вот что:

Код:

ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL hdmi:CARD=PCH

2) Выхлоп sudo cat /etc/apt/sources.list:

Код:

#/etc/apt/sources.list

3) Настройки phonon:

Mint 15 - единственная система, которую смог установить. В Kubuntu 12.04 LTS программа установки давала сбой уже в начале процесса, в Kubuntu 13.04 возникала ошибка при запуске "grub-dummy"

Да, вот выхлоп dmsg:
[code:1:2a35229728][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-26-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #38-Ubuntu SMP Mon Jun 17 21:43:33 UTC 2013 (Ubuntu 3.8.0-26.38-generic 3.8.13.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=1a6141b8-76b1-453e-8b11-aa734448f503 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000099dbefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000099dbf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebdf18
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002c000) (0MB)
[ 0.000000] efi: mem04: type=4, attr=0xf, range=[0x000000000002c000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem08: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem09: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem10: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001444000) (19MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000001444000-0x0000000002000000) (11MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003344000) (19MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000003344000-0x0000000020000000) (460MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000020200000-0x0000000034480000) (322MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000034480000-0x0000000036238000) (29MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000036238000-0x0000000040004000) (157MB)
[ 0.000000] efi: mem19: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000040005000-0x0000000060b0c000) (523MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x0000000060b0c000-0x00000000863c0000) (600MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000863c0000-0x00000000863e0000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000863e0000-0x0000000090a29000) (166MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x0000000090a29000-0x00000000913b0000) (9MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000913b0000-0x00000000915a1000) (1MB)
[ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000915a1000-0x00000000915bf000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000915bf000-0x000000009692f000) (83MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000009692f000-0x00000000971b1000) (8MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000971b1000-0x0000000097377000) (1MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x0000000097377000-0x000000009780d000) (4MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x000000009780d000-0x0000000097817000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x0000000097817000-0x000000009785e000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x000000009785e000-0x0000000097865000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000097865000-0x0000000097868000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x0000000097868000-0x0000000097869000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000097869000-0x00000000978d4000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000978d4000-0x00000000978d6000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000978d6000-0x00000000978e6000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000978e6000-0x00000000978ed000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000978ed000-0x00000000978f7000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000978f7000-0x00000000978f9000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000978f9000-0x00000000978fb000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000978fb000-0x00000000978fc000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000978fc000-0x0000000097924000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x0000000097924000-0x0000000097926000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x0000000097926000-0x0000000097a32000) (1MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x0000000097a32000-0x0000000097a36000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x0000000097a36000-0x0000000097a37000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x0000000097a37000-0x0000000097a38000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x0000000097a38000-0x0000000097a39000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x0000000097a39000-0x0000000097a3c000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x0000000097a3c000-0x0000000097aba000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x0000000097aba000-0x0000000097abe000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x0000000097abe000-0x0000000097ac1000) (0MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000097ac1000-0x0000000097ac2000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x0000000097ac2000-0x0000000097b1b000) (0MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x0000000097b1b000-0x0000000097b1c000) (0MB)
[ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x0000000097b1c000-0x0000000097b63000) (0MB)
[ 0.000000] efi: mem59: type=7, attr=0xf, range=[0x0000000097b63000-0x0000000097b64000) (0MB)
[ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x0000000097b64000-0x0000000097b84000) (0MB)
[ 0.000000] efi: mem61: type=7, attr=0xf, range=[0x0000000097b84000-0x0000000097b85000) (0MB)
[ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x0000000097b85000-0x0000000097b88000) (0MB)
[ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x0000000097b88000-0x0000000097b89000) (0MB)
[ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x0000000097b89000-0x0000000097bac000) (0MB)
[ 0.000000] efi: mem65: type=7, attr=0xf, range=[0x0000000097bac000-0x0000000097bad000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x0000000097bad000-0x0000000097bcc000) (0MB)
[ 0.000000] efi: mem67: type=7, attr=0xf, range=[0x0000000097bcc000-0x0000000097bcd000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x0000000097bcd000-0x0000000097f17000) (3MB)
[ 0.000000] efi: mem69: type=7, attr=0xf, range=[0x0000000097f17000-0x0000000097f1e000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x0000000097f1e000-0x0000000097f37000) (0MB)
[ 0.000000] efi: mem71: type=7, attr=0xf, range=[0x0000000097f37000-0x0000000097f3b000) (0MB)
[ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x0000000097f3b000-0x00000000995bf000) (22MB)
[ 0.000000] efi: mem73: type=7, attr=0xf, range=[0x00000000995bf000-0x0000000099a1c000) (4MB)
[ 0.000000] efi: mem74: type=2, attr=0xf, range=[0x0000000099a1c000-0x0000000099a28000) (0MB)
[ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x0000000099a28000-0x0000000099dbf000) (3MB)
[ 0.000000] efi: mem76: type=5, attr=0x800000000000000f, range=[0x0000000099dbf000-0x000000009a1bf000) (4MB)
[ 0.000000] efi: mem77: type=6, attr=0x800000000000000f, range=[0x000000009a1bf000-0x000000009a3bf000) (2MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x000000009a3bf000-0x000000009aebf000) (11MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
[ 0.000000] efi: mem80: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x00000001df600000) (3574MB)
[ 0.000000] efi: mem83: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem84: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem91: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ENVY dv6 Notebook PC/181B, BIOS F.27 04/22/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 1DF600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 1DF800000 mask FFF800000 uncachable
[ 0.000000] 8 base 1E0000000 mask FE0000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000020000] 20000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9affffff]
[ 0.000000] [mem 0x00000000-0x9affffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9affffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1df5fffff]
[ 0.000000] [mem 0x100000000-0x1df5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1df5fffff @ [mem 0x99a23000-0x99a27fff]
[ 0.000000] RAMDISK: [mem 0x34480000-0x36237fff]
[ 0.000000] ACPI: RSDP 000000009affe014 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 000000009affb000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 000000009afe4000 132E3 (v01 HPQOEM 181B 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009afb8000 00040
[ 0.000000] ACPI: UEFI 000000009affd000 00236 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 000000009affa000 00038 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 000000009aff9000 0008C (v03 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 000000009afe3000 00224 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe1000 01068 (v01 HPQOEM 181B 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afdf000 00028 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 000000009afdd000 00034 (v07 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009afdc000 00034 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009afda000 00044 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afd9000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afd8000 008E4 (v01 HPQOEM 181B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 00B22 (v01 HPQOEM 181B 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd3000 02EA0 (v01 HPQOEM 181B 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000009afd6000 00038 (v01 HPQOEM 181B 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
[ 0.000000] NODE_DATA [mem 0x1df5fb000-0x1df5fffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1df5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x99dbefff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x1df5fffff]
[ 0.000000] On node 0 totalpages: 1544503
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 100 pages reserved
[ 0.000000] DMA zone: 3796 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9775 pages used for memmap
[ 0.000000] DMA32 zone: 615824 pages, LIFO batch:31
[ 0.000000] Normal zone: 14296 pages used for memmap
[ 0.000000] Normal zone: 900648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 0000000099dbf000 - 000000009aebf000
[ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s85056 r8192 d21440 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1520268
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=1a6141b8-76b1-453e-8b11-aa734448f503 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5908980k/7854080k available (7010k kernel code, 1676068k absent, 269032k reserved, 6232k data, 996k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2294.797 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.59 BogoMIPS (lpj=9179188)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.030467] Security Framework initialized
[ 0.030475] AppArmor: AppArmor initialized
[ 0.030475] Yama: becoming mindful.
[ 0.030836] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032383] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.033091] Mount-cache hash table entries: 256
[ 0.033211] Initializing cgroup subsys cpuacct
[ 0.033212] Initializing cgroup subsys memory
[ 0.033217] Initializing cgroup subsys devices
[ 0.033218] Initializing cgroup subsys freezer
[ 0.033219] Initializing cgroup subsys blkio
[ 0.033221] Initializing cgroup subsys perf_event
[ 0.033222] Initializing cgroup subsys hugetlb
[ 0.033241] CPU: Physical Processor ID: 0
[ 0.033241] CPU: Processor Core ID: 0
[ 0.033245] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.033245] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.033532] mce: CPU supports 9 MCE banks
[ 0.033542] CPU0: Thermal monitoring enabled (TM1)
[ 0.033547] process: using mwait in idle threads
[ 0.033550] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.033550] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.033550] tlb_flushall_shift: 1
[ 0.033675] Freeing SMP alternatives: 24k freed
[ 0.035313] ACPI: Core revision 20121018
[ 0.087593] ftrace: allocating 26697 entries in 105 pages
[ 0.097987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.137651] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[ 0.137657] TSC deadline timer enabled
[ 0.137660] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.137665] ... version: 3
[ 0.137665] ... bit width: 48
[ 0.137666] ... generic registers: 4
[ 0.137667] ... value mask: 0000ffffffffffff
[ 0.137668] ... max period: 000000007fffffff
[ 0.137668] ... fixed-purpose events: 3
[ 0.137669] ... event mask: 000000070000000f
[ 0.151859] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.138374] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.232802] Brought up 8 CPUs
[ 0.232805] smpboot: Total of 8 processors activated (36716.75 BogoMIPS)
[ 0.238595] devtmpfs: initialized
[ 0.239223] EVM: security.selinux
[ 0.239224] EVM: security.SMACK64
[ 0.239225] EVM: security.capability
[ 0.239255] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.239776] regulator-dummy: no parameters
[ 0.239809] NET: Registered protocol family 16
[ 0.239908] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.239910] ACPI: bus type pci registered
[ 0.239960] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.239962] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.258085] PCI: Using configuration type 1 for base access
[ 0.258686] bio: create slab <bio> at 0
[ 0.258738] ACPI: Added _OSI(Module Device)
[ 0.258740] ACPI: Added _OSI(Processor Device)
[ 0.258741] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.258742] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.260040] ACPI: EC: Look up EC in DSDT
[ 0.261312] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.267779] ACPI Error: No handler for Region [RAM_] (ffff8801d60c4798) [EmbeddedControl] (20121018/evregion-376)
[ 0.267783] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20121018/exfldio-305)
[ 0.267786] ACPI Error: Method parse/execution failed [_SB_.ACCL._STA] (Node ffff8801d60f44d8), AE_NOT_EXIST (20121018/psparse-537)
[ 0.267790] ACPI Error: Method execution failed [_SB_.ACCL._STA] (Node ffff8801d60f44d8), AE_NOT_EXIST (20121018/uteval-103)
[ 0.268096] ACPI: SSDT 000000009ae3a018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.268421] ACPI: Dynamic OEM Table Load:
[ 0.268422] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.268630] ACPI: SSDT 000000009aeada98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.268975] ACPI: Dynamic OEM Table Load:
[ 0.268976] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.269094] ACPI: SSDT 000000009abbbd98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.269418] ACPI: Dynamic OEM Table Load:
[ 0.269420] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 1.127149] ACPI: Interpreter enabled
[ 1.127152] ACPI: (supports S0 S3 S4 S5)
[ 1.127168] ACPI: Using IOAPIC for interrupt routing
[ 1.167188] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.167414] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.167417] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.167595] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.167596] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 1.167701] _SB_.PCI0:_OSC invalid UUID
[ 1.167702] _OSC request data:1 8 0
[ 1.168044] PCI host bridge to bus 0000:00
[ 1.168046] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.168048] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.168049] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.168050] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.168052] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 1.168058] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.168087] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 1.168111] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.168127] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.168136] pci 0000:00:02.0: reg 10: [mem 0xd4000000-0xd43fffff 64bit]
[ 1.168141] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.168145] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 1.168191] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.168211] pci 0000:00:14.0: reg 10: [mem 0xd4600000-0xd460ffff 64bit]
[ 1.168278] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.168300] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.168322] pci 0000:00:16.0: reg 10: [mem 0xd4614000-0xd461400f 64bit]
[ 1.168394] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.168425] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.168445] pci 0000:00:1a.0: reg 10: [mem 0xd4619000-0xd46193ff]
[ 1.168530] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.168554] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.168568] pci 0000:00:1b.0: reg 10: [mem 0xd4610000-0xd4613fff 64bit]
[ 1.168632] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.168658] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.168748] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.168780] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 1.168874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.168901] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.168989] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.169018] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 1.169092] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.169120] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.169140] pci 0000:00:1d.0: reg 10: [mem 0xd4618000-0xd46183ff]
[ 1.169225] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.169249] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 1.169368] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.169384] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
[ 1.169392] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
[ 1.169399] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
[ 1.169406] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
[ 1.169414] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 1.169421] pci 0000:00:1f.2: reg 24: [mem 0xd4617000-0xd46177ff]
[ 1.169463] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.169480] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.169494] pci 0000:00:1f.3: reg 10: [mem 0xd4615000-0xd46150ff 64bit]
[ 1.169514] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f]
[ 1.169561] pci 0000:01:00.0: [10de:0de3] type 00 class 0x030000
[ 1.169567] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 1.169573] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.169580] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.169585] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
[ 1.169589] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 1.174498] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.174503] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.174508] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.174514] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.174609] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.174763] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.174825] pci 0000:08:00.0: reg 10: [mem 0xd1000000-0xd1000fff]
[ 1.175314] pci 0000:08:00.0: supports D1 D2
[ 1.175315] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 1.182546] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
[ 1.182554] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.182560] pci 0000:00:1c.2: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.182572] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.182659] pci 0000:0a:00.0: [1814:3290] type 00 class 0x028000
[ 1.182678] pci 0000:0a:00.0: reg 10: [mem 0xd4510000-0xd451ffff]
[ 1.182814] pci 0000:0a:00.0: PME# supported from D0 D3hot
[ 1.182860] pci 0000:0a:00.1: [1814:3298] type 00 class 0x0d1100
[ 1.182879] pci 0000:0a:00.1: reg 10: [mem 0xd4500000-0xd450ffff]
[ 1.183014] pci 0000:0a:00.1: supports D1
[ 1.183015] pci 0000:0a:00.1: PME# supported from D0 D1 D3hot
[ 1.190531] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.190542] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.190644] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
[ 1.190663] pci 0000:0b:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.190696] pci 0000:0b:00.0: reg 18: [mem 0xd4404000-0xd4404fff 64bit pref]
[ 1.190717] pci 0000:0b:00.0: reg 20: [mem 0xd4400000-0xd4403fff 64bit pref]
[ 1.190806] pci 0000:0b:00.0: supports D1 D2
[ 1.190808] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.198510] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.198518] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.198525] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.198608] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
[ 1.198630] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
[ 1.198648] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP04._PRT]
[ 1.198667] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP06._PRT]
[ 1.198691] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEG0._PRT]
[ 1.198746] _SB_.PCI0:_OSC invalid UUID
[ 1.198747] _OSC request data:1 1f 0
[ 1.198749] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.198750] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.199202] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.199233] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.199261] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.199290] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.199318] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.199346] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.199376] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.199404] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.199465] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.199468] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.199469] vgaarb: loaded
[ 1.199470] vgaarb: bridge control possible 0000:01:00.0
[ 1.199471] vgaarb: no bridge control possible 0000:00:02.0
[ 1.199569] SCSI subsystem initialized
[ 1.199571] ACPI: bus type scsi registered
[ 1.199591] libata version 3.00 loaded.
[ 1.199601] ACPI: bus type usb registered
[ 1.199612] usbcore: registered new interface driver usbfs
[ 1.199617] usbcore: registered new interface driver hub
[ 1.199628] usbcore: registered new device driver usb
[ 1.199675] PCI: Using ACPI for IRQ routing
[ 1.205899] PCI: pci_cache_line_size set to 64 bytes
[ 1.205981] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.205982] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.205983] e820: reserve RAM buffer [mem 0x99dbf000-0x9bffffff]
[ 1.205984] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.205985] e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
[ 1.206036] NetLabel: Initializing
[ 1.206037] NetLabel: domain hash size = 128
[ 1.206038] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.206045] NetLabel: unlabeled traffic allowed by default
[ 1.206079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.206083] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.208094] Switching to clocksource hpet
[ 1.211268] AppArmor: AppArmor Filesystem Enabled
[ 1.211282] pnp: PnP ACPI init
[ 1.211289] ACPI: bus type pnp registered
[ 1.211313] pnp 00:00: [dma 4]
[ 1.211327] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.211338] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.211407] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.211425] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.211453] system 00:04: [io 0x1100-0x110f] has been reserved
[ 1.211454] system 00:04: [io 0xffff] has been reserved
[ 1.211456] system 00:04: [io 0xffff] has been reserved
[ 1.211457] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.211459] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.211460] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.211461] system 00:04: [io 0x1200-0x1207] has been reserved
[ 1.211463] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 1.211465] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.211481] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.211510] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.211512] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.211553] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.211571] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5d SYN1e00 SYN0002 PNP0f13 (active)
[ 1.211650] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.211652] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.211653] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.211655] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.211656] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.211657] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.211659] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.211661] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.211663] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.211664] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 1.211666] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.211849] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 1.211850] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 1.211852] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.211887] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.211909] pnp: PnP ACPI: found 12 devices
[ 1.211910] ACPI: ACPI bus type pnp unregistered
[ 1.217579] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 1.217617] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 1.217619] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.217621] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.217623] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.217625] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.217628] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.217638] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
[ 1.217641] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.217646] pci 0000:00:1c.2: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.217650] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.217656] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.217660] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.217668] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.217671] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.217676] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.217711] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.217712] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.217714] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.217715] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 1.217716] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.217717] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
[ 1.217719] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.217720] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 1.217721] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
[ 1.217722] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.217724] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
[ 1.217725] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 1.217726] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
[ 1.217746] NET: Registered protocol family 2
[ 1.217863] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.218010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.218122] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.218133] TCP: reno registered
[ 1.218143] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.218163] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.218208] NET: Registered protocol family 1
[ 1.218216] pci 0000:00:02.0: Boot video device
[ 1.248178] PCI: CLS 64 bytes, default 64
[ 1.248219] Trying to unpack rootfs image as initramfs...
[ 1.601895] Freeing initrd memory: 30432k freed
[ 1.604766] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.604770] software IO TLB [mem 0x9292f000-0x9692f000] (64MB) mapped at [ffff88009292f000-ffff88009692efff]
[ 1.604804] Simple Boot Flag at 0x44 set to 0x1
[ 1.605158] Initialise module verification
[ 1.605185] audit: initializing netlink socket (disabled)
[ 1.605196] type=2000 audit(1378997316.544:1): initialized
[ 1.626490] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.627368] VFS: Disk quotas dquot_6.5.2
[ 1.627391] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.627661] fuse init (API version 7.20)
[ 1.627704] msgmni has been set to 11712
[ 1.627987] Key type asymmetric registered
[ 1.627989] Asymmetric key parser 'x509' registered
[ 1.628015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.628034] io scheduler noop registered
[ 1.628035] io scheduler deadline registered (default)
[ 1.628038] io scheduler cfq registered
[ 1.628106] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.628281] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.628290] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.628326] efifb: probing for efifb
[ 1.628666] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90021480000, using 4160k, total 4160k
[ 1.628667] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.628667] efifb: scrolling: redraw
[ 1.628669] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.631019] Console: switching to colour frame buffer device 170x48
[ 1.633245] fb0: EFI VGA frame buffer device
[ 1.633249] intel_idle: MWAIT substates: 0x21120
[ 1.633249] intel_idle: v0.4 model 0x3A
[ 1.633250] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.640380] ACPI: AC Adapter [ADP1] (on-line)
[ 1.640471] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.647949] ACPI: Lid Switch [LID0]
[ 1.648006] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.648009] ACPI: Power Button [PWRF]
[ 1.651356] ACPI: Requesting acpi_cpufreq
[ 1.716681] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.716684] ACPI: Thermal Zone [TZS0] (53 C)
[ 1.720933] [Firmware Bug]: No valid trip found
[ 1.774757] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.774760] ACPI: Thermal Zone [TZS2] (53 C)
[ 1.805067] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.805070] ACPI: Thermal Zone [TZS3] (30 C)
[ 1.805116] GHES: HEST is not enabled!
[ 1.805160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.823156] Linux agpgart interface v0.103
[ 1.823891] brd: module loaded
[ 1.824285] loop: module loaded
[ 1.824459] libphy: Fixed MDIO Bus: probed
[ 1.824491] tun: Universal TUN/TAP device driver, 1.6
[ 1.824492] tun: (C) 1999-2004 Max Krasnyansky <maxk>
[ 1.824512] PPP generic driver version 2.4.2
[ 1.824541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.824542] ehci-pci: EHCI PCI platform driver
[ 1.824573] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.824576] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.824581] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.824592] ehci-pci 0000:00:1a.0: debug port 2
[ 1.828475] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.828491] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
[ 1.839796] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.839824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.839827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.839830] usb usb1: Product: EHCI Host Controller
[ 1.839833] usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
[ 1.839836] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.839937] hub 1-0:1.0: USB hub found
[ 1.839940] hub 1-0:1.0: 2 ports detected
[ 1.840017] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.840020] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.840023] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.840034] ehci-pci 0000:00:1d.0: debug port 2
[ 1.843909] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.843920] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
[ 1.855789] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.855810] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.855813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.855816] usb usb2: Product: EHCI Host Controller
[ 1.855819] usb usb2: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
[ 1.855822] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.855920] hub 2-0:1.0: USB hub found
[ 1.855922] hub 2-0:1.0: 2 ports detected
[ 1.855978] ehci-platform: EHCI generic platform driver
[ 1.855982] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.855991] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.856018] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.856021] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.856024] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.856105] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.856141] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 1.856180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.856181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856182] usb usb3: Product: xHCI Host Controller
[ 1.856183] usb usb3: Manufacturer: Linux 3.8.0-26-generic xhci_hcd
[ 1.856184] usb usb3: SerialNumber: 0000:00:14.0
[ 1.856224] xHCI xhci_add_endpoint called for root hub
[ 1.856225] xHCI xhci_check_bandwidth called for root hub
[ 1.856236] hub 3-0:1.0: USB hub found
[ 1.856241] hub 3-0:1.0: 4 ports detected
[ 1.856432] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.856434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.856451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.856452] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856453] usb usb4: Product: xHCI Host Controller
[ 1.856454] usb usb4: Manufacturer: Linux 3.8.0-26-generic xhci_hcd
[ 1.856456] usb usb4: SerialNumber: 0000:00:14.0
[ 1.856490] xHCI xhci_add_endpoint called for root hub
[ 1.856491] xHCI xhci_check_bandwidth called for root hub
[ 1.856502] hub 4-0:1.0: USB hub found
[ 1.856508] hub 4-0:1.0: 4 ports detected
[ 1.856749] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.886062] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.886066] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.886127] mousedev: PS/2 mouse device common for all mice
[ 1.887410] rtc_cmos 00:05: RTC can wake from S4
[ 1.887513] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.887539] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.887588] device-mapper: uevent: version 1.0.3
[ 1.887624] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.887709] cpuidle: using governor ladder
[ 1.887836] cpuidle: using governor menu
[ 1.887839] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.887840] EFI Variables Facility v0.08 2004-May-17
[ 1.915187] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.145914] ashmem: initialized
[ 2.146083] TCP: cubic registered
[ 2.146152] NET: Registered protocol family 10
[ 2.146279] NET: Registered protocol family 17
[ 2.146285] Key type dns_resolver registered
[ 2.146737] Loading module verification certificates

длинные портянки лучше на пастебин выкладывать, в любом дистрибутиве есть свой подобный сервис, у Вас можно глянуть утилитку для него так:

Код:

apt-cache search paste

ну или в том же "менеджере программ" поиском глянуть, кто там менеджером в минте не знаю, но вообще, все дебиановы дети имеют мощный графичкеский инструмент для управления ПО synaptic называется.

Цитата:

Выхлоп sudo cat /etc/apt/sources.list:

в самом выводе команду cat забыли;)

Код:

cat /etc/apt/sources.list

ПС: и это, под рутом не сидите;)

Ок, про портянки понял)
в файле /etc/apt/sources.list у меня единственная строка #/etc/apt/sources.list
при запуске под рутом (sudo cat ...) выдается именно это

Код:

psicho666@schushpanzer:~ > sudo cat /etc/apt/sources.list

#/etc/apt/sources.list

psicho666@schushpanzer:~ >

Uve писал(а):

Нет, снова не работает. Если запускать Amarok вместо qmmp, то звук не пропадает.

в настройка qmmp что есть по используемому звуковому движку?
именно тут и порылась собака, отскриньте, плиз, диалог конфигов qmmp, а то мне леньтяво напасмареть ставить;)

Uve писал(а):

1) После пропажи звука запускаю skye из консоли, вижу вот что:

Код:

ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL hdmi:CARD=PCH

вывод

Код:

ls -1 /etc/init.d/

покажите.

Uve писал(а):

Mint 15 - единственная система, которую смог установить. В Kubuntu 12.04 LTS программа установки давала сбой уже в начале процесса, в Kubuntu 13.04 возникала ошибка при запуске "grub-dummy"

UEFI и этим всё сказано, кстати, с уефями лучше всех в плане искаробочности у федорки и опенсюзи дела обстоят, это чтобы с бубнами не прыгать, федорка, та, емнип, то-ли с 14-ой, то-ли с 15-ой при инсталле сама сразу спрашивает, "как будет стричься, с уефи или бэззз?"
вот с 19-ой, инсталлятора структура:

Код:

ls -1 media/sanja/Fedora 19 x86_64/

EFI

images

isolinux

LiveOS

Packages

repodata

TRANS.TBL

ls -1 media/sanja/Fedora 19 x86_64/EFI/BOOT/

BOOTX64.efi

fonts

grub.cfg

grubx64.efi

MokManager.efi

TRANS.TBL

Uve писал(а):

в файле /etc/apt/sources.list у меня единственная строка #/etc/apt/sources.list

вот накуролесили, минтостроители, а что у нас вообще там есть:

Код:

ls -1 /etc/apt/

вот диалоги конфигов qmmp:

вот вывод ls -1 /etc/init.d/
http://pastebin.com/yWX52eSL

Гм. Вот Федору забыл. В принципе, могу еще попробовать поставить ее. Она лучше Mint'a?

Добавлено спустя 1 минуту 9 секунд:

Да, вот еще

Код:

psicho666@schushpanzer:~ >  ls -1 /etc/apt/ 

apt.conf.d

preferences.d

sources.list

sources.list.d

trustdb.gpg

trusted.gpg

trusted.gpg~

trusted.gpg.d

psicho666@schushpanzer:~ >

Uve писал(а):

Гм. Вот Федору забыл. В принципе, могу еще попробовать поставить ее. Она лучше Mint'a?

ну не лучше и не хуже, тут больше дело привычки, мне, например, больше rpm-based дистрибутивы нравятся, особенно шапочное семейство, кто-то к дебиану привык, кто-то к бубунтам, кого-то хлебом не корми, дай поконпелять, да пооптимизировать, этих фанатов USE-флагов зовут гентушники, везде можно найти и плюсы и минусы, вон, на 19 федорке сейчас меня бумблиби проверяет на прочность, нет, ничего не крашится, но после каждого использования оптимуса идёт алерт. вобщем, тут кому что на душу легло, тот от того и сходит с ума. Wink

единственно что по минту, дистрибутив молодой, пакетная база конечно дебиановская, но именно детских ошибок в пересборке пакетов может быть больше, тем более, что они, минтовцы, вроде как анстейбл дебовский берут за основу.

Uve писал(а):

Да, вот еще

отжеж накуролесили ... на пастебин тогда закиньте ещё:

Код:

sudo cat /etc/apt/*.d

если ругнётся, на то, что *.d - каталоги (я чота тупанул, надо было ls с ключём -l просить, а так не видно, что это), тогда вывод:

Код:

sudo cat /etc/apt/*/*.list

по остальному уже из дома глядеть буду, где-то после 20:00 мск вылезу в онлайн, продолжим, кроме альсы, что ещё доступно в выборе движка? если что, можно скрипт-обёртку написать, чтобы принудительно альсу перезапускал перед запуском скайпа, раз уж после qmmp альса не доступна для остальных прикладух.

Ну пастебин не понадобится Very Happy

Код:

sudo cat /etc/apt/*.d

[sudo] password for psicho666: 

cat: /etc/apt/apt.conf.d: Это каталог

cat: /etc/apt/preferences.d: Это каталог

cat: /etc/apt/sources.list.d: Это каталог

cat: /etc/apt/trusted.gpg.d: Это каталог

Доступны также модули JACK, OSS4, нулевого вывода и Pulseaudio. Звук в qmmp работает только при выборе ALSА или Pulseaudio.

Добавлено спустя 54 секунды:

Код:

sudo cat /etc/apt/*/*.list 

deb http://ppa.launchpad.net/bumblebee/stable/ubuntu raring main

deb-src http://ppa.launchpad.net/bumblebee/stable/ubuntu raring main

# Do not edit this file manually, use Software Sources instead.

deb http://packages.linuxmint.com olivia main upstream import  #id:linuxmint_main

deb http://archive.ubuntu.com/ubuntu raring main restricted universe multiverse

deb http://archive.ubuntu.com/ubuntu raring-updates main restricted universe multiverse

deb http://security.ubuntu.com/ubuntu/ raring-security main restricted universe multiverse

deb http://archive.canonical.com/ubuntu/ raring partner

deb http://packages.medibuntu.org/ raring free non-free

Uve
поставить пульсу по умолчанию движком в qmmp, альсу оставить для скайпа, проверить на этой конфигурации, с тзбэ, должно работать без затыков теперь. по репам всё стало более-менее на свои места.

Old_Punk
До этого я допер еще вчера. Не работает.
Пока вижу решение снести qmmp и жить с amarok'ом

Uve писал(а):

Пока вижу решение снести qmmp и жить с amarok'ом

не факт. я бы не спешил, я бы сделал так:
1. забекапил бы персональные настройки:

Код:

mv ~/.Skype ~/.skype_back

2. снёс бы репозиторный:

Код:

sudo apt-get purge skype

3. и пробовал бы со сборкой с оффсайта, сначала бинарь:
3.1. http://www.skype.com/ru/download-skype/skype-for-linux/downloading/?type=ubuntu64
скачать и в папке с пакетом

Код:

sudo dpkg -i skype-ubuntu-precise_4.2.0.11-1_i386.deb && sudo apt-get install -f

не пошло бы, тогда взял бы готовый тарбол
http://www.skype.com/ru/download-skype/skype-for-linux/downloading/?type=dynamic
удалил бы до того установленный пакет (см. пп. 1 и 2.)
распаковал бы пакет в хомяке в отдельную директорию, например:

Код:

mkdir ~/skype

и в неё распаковал.
ну и запустил бы отуда и смотрел:

Код:

~/skype/skype

и уж после этого, если бы меня ждало фиаско, то тогда бы что-то сносил и возвращал репозиторный скайп.
ПС: кстати, в федоровской сборке скайпа с оффсайта скайповского звук идёт через пульс, но не через альсу:

Код:

[sanja@corsair ~]$ grep -i audio .Skype/shared.xml 

    <Audio>

    </Audio>

        <PulseAudio>42</PulseAudio>

ППС: и таки да, у супруги на ноуте была кубунта два года, скайп ставил не репозиторный, не с лаунчпада, а именно *.deb с оффсайта скайповского, всё работало.